Effects of folate-chicory acid liposome on macrophage polarization and TLR4/NF-κB signaling pathway in ulcerative colitis mouse.

BACKGROUND: Chichoric acid (CA) is a major active ingredient found in chicory and Echinacea. As a derivative of caffeic acid, it has various pharmacological effects. PURPOSE: Due to the unclear etiology and disease mechanisms, effective treatment methods for ulcerative colitis (UC) are currently lacking. The study investigated the therapeutic effects of the folate-chicory acid liposome on both LPS-induced macrophage inflammation models and dextran sulfate sodium (DSS)-induced mouse UC models. METHODS: Folate-chicory acid liposome was prepared using the double emulsion ultrasonic method with the aim of targeting folate receptors specifically expressed on macrophages. The study investigated the therapeutic effects of the folate-chicory acid liposome on both LPS-induced macrophage inflammation models and DSS -induced mouse UC models. Furthermore, the effects of the liposomes on macrophage polarization and their underlying mechanisms in UC were explored. RESULTS: The average particle size of folate-chicory acid liposome was 120.4 ± 0.46 nm, with an encapsulation efficiency of 77.32 ± 3.19 %. The folate-chicory acid liposome could alleviate macrophage apoptosis induced by LPS, decrease the expression of inflammatory factors in macrophages, enhance the expression of anti-inflammatory factors, inhibit macrophage polarization towards the M1 phenotype, and mitigate cellular inflammation in vetro. In vivo test, folate-chicory acid liposome could attenuate clinical symptoms, increased colon length, reduced DAI scores, CMDI scores, and alleviated the severity of colonic histopathological damage in UC mice. Furthermore, it inhibited the polarization of macrophages towards the M1 phenotype in the colon and downregulated the TLR4/NF-κB signaling pathway, thereby ameliorating UC in mice. CONCLUSION: Folate-chicory acid liposome exhibited a uniform particle size distribution and high encapsulation efficiency. It effectively treated UC mice by inhibiting the polarization of macrophages towards the M1 phenotype in the colon and downregulating the TLR4/NF-κB signaling pathway.

Fabrication of D-α-tocopheryl polyethylene glycol 1000 succinates and human serum albumin conjugated chitosan nanoparticles of bosutinib for colon targeting application; in vitro-in vivo investigation.

For more effective chemotherapy and targeted treatment of colorectal cancer, this study seeks to develop chitosan (CH)-human serum albumin (HAS)-D-α-tocopheryl polyethylene glycol 1000 (TPGS) nanoparticles (BOS-CH-HSA-TPGS-NPs) coated with Bosutinib (BOS). Nuclear magnetic resonance (NMR) indicated that chitosan's structure was modified by carbodiimide coupling with HSA. We used a Box-Behnken design to find the ideal region for particle size, zeta potential, and entrapment efficiency, eventually emerging at a formulation with these values: 187.14 ± 3.2 nm, 76.2 ± 0.96 %, and 21.1 ± 2.3 mV. Differential scanning calorimetry (DSC), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), High-performance liquid chromatography (HPLC) were all used to characterize the sample in detail. At a phosphate buffer pH of 7.4, in vitro drug release tests showed both Higuchi model release (0.954) and Fickian diffusion (n = 0.5). Compared to free BOS, HCT116 cell lines showed considerably higher cytotoxicity in in vitro cytotoxicity assays. In male albino Wistar rats, the BOS-CH-HSA-TPGS-NPs also showed enhanced pharmacokinetics, targeting efficiency, and biocompatibility. When used to the treatment of colorectal cancer, the BOS-CH-HSA-TPGS NPs show promise as a sustained-release therapy with improved therapeutic effects by addressing the challenges of poor solubility, poor permeability, and toxic side effects.

Development of poly(butylene adipate-co-butylene succinate-co-ethylene adipate-co-ethylene succinate) (PBEAS) net twine as biodegradable fishing gear.

Nylon fishing nets have excellent strength and durability, but when lost at sea, their insufficient decomposition destroys habitats and spawning grounds, and pollutes the marine environment. This led to the development of poly(butylene succinate) (PBS) resin for biodegradable fishing gear based on aliphatic fibers. Prompted by the low stiffness and elastic recovery of PBS, we introduced two additional components into the molecular structure of PBS: adipic acid and ethylene glycol. These two new components were combined with succinic acid and 1,4-butanediol, the existing components of PBS, to synthesize poly(butylene adipate-co-butylene succinate-co-ethylene adipate-co-ethylene succinate) (PBEAS) resin via esterification and polycondensation reactions of a quaternary aliphatic copolyester. Although the molecular weight and molecular weight distribution of PBEAS are similar to those of PBS, it has excellent tensile strength, stiffness, elastic recovery, and biodegradability, with a low melting point for good production efficiency. These improvements are expected to allow PBEAS resin to be applied to gill nets for fish that require high stiffness, thereby expanding the use of biodegradable fishing gear.

Discovery of Itaconate-Mediated Lysine Acylation.

Itaconate is an important antimicrobial and immunoregulatory metabolite involved in host-pathogen interactions. A key mechanistic action of itaconate is through the covalent modification of cysteine residues via Michael addition, resulting in "itaconation". However, it is unclear whether itaconate has other regulatory mechanisms. In this work, we discovered a novel type of post-translational modification by promiscuous antibody enrichment and data analysis with the open-search strategy and further confirmed it as the lysine "itaconylation". We showed that itaconylation and its precursor metabolite itaconyl-CoA undergo significant upregulation upon lipopolysaccharides (LPS) stimulation in RAW264.7 macrophages. Quantitative proteomics identified itaconylation sites in multiple functional proteins, including glycolytic enzymes and histones, some of which were confirmed by synthetic peptide standards. The discovery of lysine itaconylation opens up new areas for studying how itaconate participates in immunoregulation via protein post-translational modification.

Synthesis and Structure-Property Relationships of Novel High Molecular Weight Fully Biobased 2,5-Thiophenedicarboxylic Acid-Based Polyesters.

High molecular weight fully biobased poly(propylene succinate-co-2,5-thiophenedicarboxylate) (PPSTF) random copolyesters based on the emerging biobased aromatic diacid, 2,5-thiophenedicarboxylic acid (TFDCA), in full composition range were synthesized via melt polycondensation. Their crystallization behavior, thermal-mechanical, gas barrier, and biodegradable properties were systematically investigated. A certain level of comonomer cocrystallization was evidenced by XRD, and PTF units had stronger crystallization competitive capability compared to PS units due to the higher stiffness of TFDCA units. These copolyesters exhibited excellent thermal stability, and mechanical properties can be easily controlled by tuning the varied ratio of flexible to rigid segments. Gas barrier properties were studied from both theoretically calculated and experimental perspectives, and the copolyesters even with 50 mol % PS units still showed superior gas permeation resistance. The selected lipase from Aspergillus oryzae can degrade the copolyesters with up to 60 mol % PTF units. The nonbiodegradable-biodegradable transition was found to occur at the number-average sequence length of aromatic PTF units as low as about 3. Interestingly, when compared with their terephthalic acid-based (TA-based) and 2,5-furandicarboxylic acid-based (FDCA-based) analogues with the same content of aromatic units, the apparent degradation rate constant (k) and half period (t1/2) of PPSTF60 were actually between them. These findings offer much promise for the application of polyesters containing odd-carbon diol monomers in green packaging and other fields.

Enhanced Insecticidal Effect and Interface Behavior of Nicotine Hydrochloride Solution by a Vesicle Surfactant.

Nicotine hydrochloride (NCT) has a good control effect on hemiptera pests, but its poor interfacial behavior on the hydrophobic leaf leads to few practical applications. In this study, a vesicle solution by the eco-friendly surfactant, sodium diisooctyl succinate sulfonate (AOT), was prepared as the pesticide carrier for NCT. The physical chemical properties of NCT-loaded AOT vesicles (NCT/AOT) were investigated by techniques such as dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The results showed that the pesticide loading and encapsulation efficiency of NCT/AOT were 10.6% and 94.8%, respectively. The size of NCT/AOT vesicle was about 177 nm. SAXS and surface tension results indicated that the structure of the NCT/AOT vesicle still existed with low surface tension even after being diluted 200 times. The contact angle of NCT/AOT was always below 30°, which means it could wet the surface of the cabbage leaf well. Consequently, NCT/AOT vesicles could effectively reduce the bounce of pesticide droplets. In vitro release experiments showed that NCT/AOT vesicles had sustained release properties; 60% of NCT in NCT/AOT released after 24 h, and 80% after 48 h. Insecticidal activity assays against aphids revealed that AOT vesicles exhibited insecticidal activity and could have a synergistic insecticidal effect with NCT after the loading of NCT. Thus, the NCT/AOT vesicles significantly improved the insecticidal efficiency of NCT, which has potential application in agricultural production activities.

Biodegradable chelant-metal complexes enhance cadmium phytoextraction efficiency of Solanum americanum.

Toxic contaminants (metals and metal-containing compounds) are accumulating in the environment at an astonishing rate and jeopardize human health. Remarkable industrial revolution and the spectacular economic growth are the prime causes for the release of such toxic contaminants in the environment. Cadmium (Cd) is ranked the 7th most toxic compound by the Agency for Toxic Substances and Disease Registry (USA), owing to its high carcinogenicity and non-biodegradability even at miniscule concentration. The present study assessed the efficiency of four biodegradable chelants [nitrilotriacetic acid (NTA), ethylenediamine disuccinate (EDDS), ethylene glycol tetraacetic acid (EGTA), and citric acid (CA)] and their dose (5 mM and 10 mM) in enhancing metal accumulation in Solanum americanum Mill. (grown under 24 mg Cd kg-1 soil) through morpho-physiological and metal extraction parameters. Significant variations were observed for most of the studied parameters in response to chelants and their doses. However, ratio of root and shoot length, and plant height stress tolerance index differed non-significantly. The potential of chelants to enhance Cd removal efficiency was in the order - EGTA (7.44%) > EDDS (6.05%) > NTA (4.12%) > CA (2.75%). EGTA and EDDS exhibited dose-dependent behavior for Cd extraction with 10 mM dose being more efficient than 5 mM dose. Structural equation model (SEM) depicted strong positive interaction of metal extraction parameters with chelants (Z-value = 11.61, p = 0.001). This study provides insights into the importance of selecting appropriate dose of biodegradable chelants for Cd extraction, as high chelant concentration might also result in phytotoxicity. In the future, phytoextraction potential of these chelants needs to be examined through field studies under natural environmental conditions.

Preparation and physiochemical properties of enzymatically modified octenyl succinate starch.

The high viscosity and low solubility of octenyl succinate starch (OSAS) in water often lead to low reaction efficiency and uneven distribution of OSA groups, which can be solved by subjecting OSA starch to enzymatic digestion. Waxy corn starch is used to produce OSAS. The molecular weight of enzymolysis modified octenyl succinate starches (E-OSAS) decreased with the addition of enzyme, and the substitution of enzymatically digested OSAS was larger than that of OSAS. As the addition of pullulanase increased, the substitution of E-OSAS tended to increase and the apparent viscosity decreased significantly. The smaller its particle size and polydispersity index (PDI), the larger the absolute value of the zeta potential. E40 -OSAS with the smallest particle size and best homogeneity and stability had the smallest weight average molecular weight (1.38 × 106  g/mol), the smallest number average molecular weight (1.37 × 105  g/mol), and the largest degree of substitution of 0.019. The E-OSAS has not been investigated deeply enough, and the enzymatic treatment by pullulanase is not much studied, so this study is of great importance to provide some basis for the research of new microcapsules. PRACTICAL APPLICATION: This work aims to provide wall materials with lower viscosity and better encapsulation properties for the food industry. Waxy corns starch is used to manufacture OSAS. This wall material is a partly biodegradable material that is hydrophilic on the outside and hydrophobic on the inside, and its preparation process is in line with the concept of green chemistry.

Four-Octyl Itaconate Protects Chondrocytes against H2O2-Induced Oxidative Injury and Attenuates Osteoarthritis Progression by Activating Nrf2 Signaling.

Nrf2 is a critical regulator of the antioxidant defense systems in cellular protection. Emerging evidence has shown that four-octyl itaconate (OI) activates Nrf2 cascade. In this study, the chondroprotective effects of OI on H2O2-stimulated chondrocytes and DMM-induced osteoarthritis (OA) progression were investigated. In primary murine chondrocytes, OI interrupted the binding of Keap1 and Nrf2, leading to accumulation and nuclear translocation of Nrf2 protein, as well as transcription and expression of Nrf2-dependent genes, such as HO-1, NQO1, and GCLC. Furthermore, OI inhibited cell death and apoptosis, as well as H2O2-stimulated ROS generation, lipid peroxidation, superoxide accumulation, and mitochondrial depolarization in chondrocytes, which were abolished by the silence or depletion of Nrf2. In addition, in vivo experiments revealed the therapeutic effects of OI on OA progression in a DMM mouse model. Collectively, these results suggested that OI might serve as a potential treatment for OA progression.

Inactive pseudoenzyme subunits in heterotetrameric BbsCD, a novel short-chain alcohol dehydrogenase involved in anaerobic toluene degradation.

Anaerobic toluene degradation proceeds by fumarate addition to produce (R)-benzylsuccinate as first intermediate, which is further degraded via ß-oxidation by five enzymes encoded in the conserved bbs operon. This study characterizes two enzymes of this pathway, (E)-benzylidenesuccinyl-CoA hydratase (BbsH), and (S,R)-2-(α-hydroxybenzyl)succinyl-CoA dehydrogenase (BbsCD) from Thauera aromatica. BbsH, a member of the enoyl-CoA hydratase family, converts (E)-benzylidenesuccinyl-CoA to 2-(α-hydroxybenzyl)succinyl-CoA and was subsequently used in a coupled enzyme assay with BbsCD, which belongs to the short-chain dehydrogenases/reductase (SDR) family. The BbsCD crystal structure shows a C2-symmetric heterotetramer consisting of BbsC2 and BbsD2 dimers. BbsD subunits are catalytically active and capable of binding NAD+ and substrate, whereas BbsC subunits represent built-in pseudoenzyme moieties lacking all motifs of the SDR family required for substrate binding or catalysis. Molecular modeling studies predict that the active site of BbsD is specific for conversion of the (S,R)-diastereomer of 2-(α-hydroxybenzyl)succinyl-CoA to (S)-2-benzoylsuccinyl-CoA by hydride transfer to the re-face of nicotinamide adenine dinucleotide (NAD)+ . Furthermore, BbsC subunits are not engaged in substrate binding and merely serve as scaffold for the BbsD dimer. BbsCD represents a novel clade of related enzymes within the SDR family, which adopt a heterotetrameric architecture and catalyze the ß-oxidation of aromatic succinate adducts.

Evaluation of gum ghatti-g-poly(itaconic acid) magnetite nanocomposite as an adsorbent material for water purification.

A porous hydrogel nanocomposite has been made by grafting poly(itaconic acid) on the polysaccharide, gum ghatti and by embedding magnetite nanoparticles in the copolymer gel matrix. This novel functional material Ggh-g-PIA/Fe3O4 was characterized by FTIR, TGA, SEM, EDS, XRD, BET, Zeta potential measurements and VSM techniques. The nanocomposite possesses mesoporous structure with high surface area and exhibits super-paramagnetic behavior due to the presence of magnetite nanoparticles. The hydrogel nanocomposite was evaluated as an adsorbent material for removal of dyes and divalent metal ions. Significant adsorption capacities of 410.2, 387.6, 416.5 and 401.4 mg g-1 towards methylene blue, rhodamine 6G, Cu (II) and Hg (II) ions respectively were observed. The adsorption isotherms were well described by the Freundlich isotherm model and kinetic studies demonstrated the adsorption to be a pseudo second order kinetic process. Intraparticle diffusion model suggested adsorption to occur by a multi-step diffusion process. Thermodynamic studies indicated a spontaneous and endothermic adsorption. Further, the desorption study indicated the possibility of successful regeneration of the adsorbent. A high removal efficiency, recyclability, convenient recovery after use due to the magnetic nature makes this polysaccharide based nanocomposite an environment friendly adsorbent material for water purification.

Ag/LDH-itaconic acid-gellan gam nanocomposites: Facile and green synthesis, characterization, and excellent catalytic reduction of 4-nitrophenol.

The catalytic reduction reaction is one of the most commonly used solutions to convert high-risk contaminants into safe or low-risk materials. Today, with the increasing water pollution, the urgent need for efficient and effective catalysts is felt more than ever. For this purpose, for the first time, a green catalyst composed of silver nanoparticles anchored on itaconic acid-modified Ca-Al layered double hydroxide/gellan gum nanocomposite (Ag/LDH-ITA-GG NC) was prepared from a green approach without the use of any toxic organic solvents. To gain an in-depth insight into the physicochemical properties of the catalyst, different techniques including nitrogen adsorption-desorption isotherms, FESEM/mapping, FTIR, TGA, and XRD were used. The catalytic performance of the Ag/LDH-ITA-GG NC toward 4-nitrophenol reduction by NaBH4 was investigated. The calculated values of the apparent rate constant for this reaction are 0.2142 min-1 (for 1.0 mg of the catalyst), 0.2375 min-1 (for 3.0 mg of the catalyst), and 0.2550 min-1 (for 5.0 mg of the catalyst), indicating that the catalytic conversion of 4-nitrophenol to 4-aminophenol on the Ag/LDH-ITA-GG NC catalyst follows the pseudo-first-order kinetics and is comparable to the previous findings in the literature. The results of this study indicated that Ag/LDH-ITA-GG NC can potentially be utilized as an auspicious high efficient green catalyst for the reduction of pollutants like 4-nitrophenol.

Mechanism-Based Inactivation of Mycobacterium tuberculosis Isocitrate Lyase 1 by (2R,3S)-2-Hydroxy-3-(nitromethyl)succinic acid.

The isocitrate lyase paralogs of Mycobacterium tuberculosis (ICL1 and 2) are essential for mycobacterial persistence and constitute targets for the development of antituberculosis agents. We report that (2R,3S)-2-hydroxy-3-(nitromethyl)succinic acid (5-NIC) undergoes apparent retro-aldol cleavage as catalyzed by ICL1 to produce glyoxylate and 3-nitropropionic acid (3-NP), the latter of which is a covalent-inactivating agent of ICL1. Kinetic analysis of this reaction identified that 5-NIC serves as a robust and efficient mechanism-based inactivator of ICL1 (kinact/KI = (1.3 ± 0.1) × 103 M-1 s-1) with a partition ratio <1. Using enzyme kinetics, mass spectrometry, and X-ray crystallography, we identified that the reaction of the 5-NIC-derived 3-NP with the Cys191 thiolate of ICL1 results in formation of an ICL1-thiohydroxamate adduct as predicted. One aspect of the design of 5-NIC was to lower its overall charge compared to isocitrate to assist with cell permeability. Accordingly, the absence of the third carboxylate group will simplify the synthesis of pro-drug forms of 5-NIC for characterization in cell-infection models of M. tuberculosis.

Dual Loading of Doxorubicin and Magnetic Iron Oxide into PLA-TPGS Nanoparticles: Design, in vitro Drug Release Kinetics, and Biological Effects on Cancer Cells.

The multifunctional nano drug delivery system (MNDDS) has much revolutionized in cancer treatment, aiming to eliminate many disadvantages of conventional formulations. This paper herein proposes and demonstrates MNDDS inspired by poly(lactide)-tocopheryl polyethylene glycol succinate (PLA-TPGS) copolymer co-loaded Doxorubicin and magnetic iron oxide nanoparticles (MIONs) with a 1 : 1 (w/w) optimal ratio. In vitro drug release kinetics of Doxorubicin from this nanosystem fitted best to the Weibull kinetic model and can be described by the classical Fickian diffusion mechanism under acidic pH conditions. The combination of MIONs and Doxorubicin in the PLA-TPGS copolymer has maintained the fluorescence properties of Doxorubicin and good cell penetration, especially inside the nucleus and its vicinity. Moreover, different cell cycle profiles were observed in HeLa cell lines treated with MNDDSs.

Poly(vinyl alcohol-co-itaconic acid) hydrogels grafted with several designed peptides for human pluripotent stem cell culture and differentiation into cardiomyocytes.

We developed poly(vinyl alcohol-co-itaconic acid) (PV) hydrogels grafted with laminin-derived peptides that had different joint segments and several specific designs, including dual chain motifs. PV hydrogels grafted with a peptide derived from laminin-ß4 (PMQKMRGDVFSP) containing a joint segment, dual chain motif and cationic amino acid insertion could attach human pluripotent stem (hPS) cells and promoted high expansion folds in long-term culture (over 10 passages) with low differentiation rates, whereas hPS cells attached poorly on PV hydrogels grafted with laminin-α5 peptides that had joint segments with and without a cationic amino acid or on PV hydrogels grafted with laminin-ß4 peptides containing the joint segment only. The inclusion of a cationic amino acid in the laminin-ß4 peptide was critical for hPS cell attachment on PV hydrogels, which contributed to the zeta potential shifting to higher values (3-4 mV enhancement). The novel peptide segment-grafted PV hydrogels developed in this study supported hPS cell proliferation, which induced better hPS cell expansion than recombinant vitronectin-coated dishes (gold standard of hPS cell culture dishes) in xeno-free culture conditions. After long-term culture on peptide-grafted hydrogels, hPS cells could be induced to differentiate into specific lineages of cells, such as cardiomyocytes, with high efficiency.

Psammaceratin A: A Cytotoxic Psammaplysin Dimer Featuring an Unprecedented (2Z,3Z)-2,3-Bis(aminomethylene)succinamide Backbone from the Red Sea Sponge Pseudoceratina arabica.

Bioassay-guided partition of the extract of the Red Sea sponge Pseudoceratina arabica and HPLC purification of the active fraction gave a psammaplysin dimer, psammaceratin A (1), along with psammaplysin A (2). The dimer comprises two units of psammaplysin A (2) connected via the terminal amines with an unprecedented (2Z,3Z)-2,3-bis(aminomethylene)succinamide moiety, and it represents the first dimer to be identified among the psammaplysin family. Data from 1D- and 2D-NMR and HRMS supported the chemical structures of the compounds. Psammaceratin A (1) and psammaplysin A (2) exhibited significant growth inhibition of HCT 116, HeLa, and MBA-MB-231 cells down to 3.1 µM.

Acidic and alkaline gas sensitive and self-healing chitosan aerogel based on electrostatic interaction.

Gas pollution is a serious problem. More attention has been paid to the detection and monitoring of toxic and harmful gases, and it is urgently needed for a sensor that could simultaneously identify and distinguish between acid and base gases. Based on the electrostatic interaction resulting from amidogen of chitosan (CS) and carboxylic groups of itaconic acid (IA), we successfully prepared a series of biomass aerogels (CS-IA aerogels) that could respond to acidic and alkaline gases with different concentrations. The acidic and alkaline gases could be easily detected and distinguished by changing the content of IA in CS-IA aerogels. Moreover, the electrostatic interactions could also endowed CS-IA aerogels with self-healing ability in the breaks at room temperature. After self-healing, CS-IA aerogels still sensitively answered to acidic and alkaline gases. CS-IA aerogels with sensitivity to acid-base gas and self-healing performance has been suggested to be promising candidates as application of multi-functional aerogels.

Effect of pH on the antimicrobial activity of the macrophage metabolite itaconate.

The production of itaconate by macrophages was only discovered in 2011. An increasing number of studies have since revealed essential biological functions for this small molecule, ranging from antimicrobial to immunomodulator. The antibacterial role of itaconate has however been questioned because the estimated concentration of itaconate in macrophages (low-millimolar) is lower than the minimum inhibitory concentration (MIC) of itaconate reported for several bacterial strains (low-to-mid-millimolar). We note that some of these investigations have tended to ignore the high acidity of this small diacid (pKas 3.85 and 5.45), thereby potentially biassing activity measurements. We measured the MIC of itaconate in Escherichia coli (not known to metabolize itaconate) and in Salmonella enterica serovar Typhimurium (known to metabolize itaconate) at varying pH values to probe the effect that pH has on itaconate toxicity. Herein, we demonstrate that the antimicrobial effect of itaconate is dependent upon the pH of the media and that itaconate does have antimicrobial activity at biologically relevant pH and concentrations. Under nutrient-poor conditions, the antimicrobial activity of itaconate in both E. coli and S. Typhimurium increased approximately 200-fold when the pH was dropped by one unit, whereas itaconate was not found to be toxic under nutrient rich conditions. Our results also reveal that the activity of itaconate is synergistic with acidity, yet is not a function of increased permeability with protonation. Similar experiments performed with succinate (a pKa-matched diacid) yielded drastically different results, consistent with a target-based mechanism of action for itaconate. Overall, our work shows the importance of controlling the pH when performing experiments with itaconic acid.

Heterogeneous multimeric structure of isocitrate lyase in complex with succinate and itaconate provides novel insights into its inhibitory mechanism.

During the glyoxylate cycle, isocitrate lyases (ICLs) catalyze the lysis of isocitrate to glyoxylate and succinate. Itaconate has been reported to inhibit an ICL from Mycobacterium tuberculosis (tbICL). To elucidate the molecular mechanism of ICL inhibition, we determined the crystal structure of tbICL in complex with itaconate. Unexpectedly, succinate and itaconate were found to bind to the respective active sites in the dimeric form of tbICL. Our structure revealed the active site architecture as an open form, although the substrate and inhibitor were bound to the active sites. Our findings provide novel insights into the conformation of tbICL upon its binding to a substrate or inhibitor, along with molecular details of the inhibitory mechanism of itaconate.

Optimization, in vitro release and toxicity evaluation of novel pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum semi-interpenetrating networks.

BACKGROUND: In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue. METHODS: Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL. RESULTS: Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum. CONCLUSION: Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.